DSP Amp para subwoofer
Sinbosen DSP 18000Q profissional 4 canais classe placa td amplificador de potência dsp
Item número.: DSP18000Q
Modelo: DSP18000Q
Canal: amplificador de potência de 4 canais
Potência de saída:
Potência estéreo 8Ω (RMS): 1.800 W X 4CH
Potência estéreo 4Ω (RMS): 3.000 W X 4CH
Classe: TD
Certificação: CE, ROHS, TUV
Garantia: 3 anos
Serviço especial: serviço OE
Canal: amplificador de potência de 4 canais
Potência de saída:
Potência estéreo 8Ω (RMS): 1.800 W X 4CH
Potência estéreo 4Ω (RMS): 3.000 W X 4CH
Classe: TD
Certificação: CE, ROHS, TUV
Garantia: 3 anos
Serviço especial: serviço OE
Descrição
Sinbosen Audio DSP Series Amplifier
| DSP Amplifier | DSP18000Q | ||||||
| 8 ohm Stereo Power (RMS) | 1800WX4 | ||||||
| 4 ohm Stereo Power (RMS) | 3000WX4 | ||||||
| 8 ohm Bridged Power (RMS) | 6000W | ||||||
| 4 ohm Bridged Power (RMS) | 9000W | ||||||
| Frequency Response(+o/-0.3dB,1W/8Ω): | 20 Hz - 34 kHz | ||||||
| THD 20 Hz - 20 kHz for 1W: | <0.1% | ||||||
| Signal-to-Noise Ratio: | >112 dBA | ||||||
| Channel separation (Crosstalk) at 1 kHz : | >70 dB | ||||||
| Input Connectors (per channel): | 3 pin XLR, electronically balanced | ||||||
| Output Connectors (per channel): | Binding Posts 2-pole | ||||||
| Class: | TD | ||||||
| TourClass Protection: | ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input | ||||||
| Operating voltage, 220V / 110V nominal: | 180-240 V / 90-130 V selectable | ||||||
| Voltage Gain(dB): | 23, 26, 29, 32, 35, 38, 41, 44 dB selectable | ||||||
| Input impedance: | 20 kOhm | ||||||
| Level adjustment (per ch.): | Front panel potentiometer, 31 positions detented from -inf to 0 dB | ||||||
| Touch screen | Software control | Multiple power amplifier controls |
| Amplifier built-in processor,4 inch size led screen can touch,control the amplifier sound effect | DSP amplifier also cintrol by PC,through software can more precise adjustment dsp processor | One PC can independent control serveral dsp amplifier at the same time |
Характерная черта
4-канальный импульсный усилитель мощности класса TD с DSP
4 x 2800 Вт на 4 Ом, 4 x 1450 Вт на 8 Ом
Создавайте ПРЕВОСХОДНОЕ качество звука
Управляйте звуковыми эффектами касанием на переднем 4-дюймовом светодиодном экране.
Или управляйте звуковым эффектом с помощью компьютера
Простое программное обеспечение DSP, не требует установки, простое управление
Работа в мостовом режиме для туристических приложений
Комплексная схема защиты
Используйте высококачественный конденсатор 3300 мкФ 200 В
Разъемы Neutrik XLR * / Speakon
 |
 |
 |
 |
 |
 |
